What Is The Reason Why The Stainless Steel Nozzle Does Not Spray?

1, waterproof ring missing

If the Stainless steel nozzle's waterproof ring is leaking and the leak-proof device is corroded or damaged, it will cause dripping of the Stainless steel nozzle during the spraying process. At this time, we need to repair or replace the leak-proof device to ensure the normal spray of the atomizing Stainless steel nozzle.

2, the connection has problems

If there is a problem with the connection of the atomizing Stainless steel nozzle, the sealing is not so good, and the dripping of the atomizing Stainless steel nozzle during the spraying process may occur. What we need to do at this time is to reconnect the atomizing Stainless steel nozzle to ensure its good sealing, so as to prevent dripping.

3, the threaded interface is not connected intact

The same problem can occur if the Stainless steel nozzle is incompletely connected to its threaded interface. How do we need to take remedial measures at this time? Then you need to reconnect. If the atomizing Stainless steel nozzle itself has a cause, a new atomizing Stainless steel nozzle needs to be replaced to ensure that such problems do not occur.

How is the cooling efficiency of the Stainless steel nozzle?

The cooling efficiency of the Stainless steel nozzle is high, and it is suitable for gases that need to be cooled quickly.

Under the low pressure system, the cooling effect of the Stainless steel nozzle was studied. By controlling the boiling point of the fluid, the purpose of controlling the surface temperature can be achieved. Cooling technology is affected by many factors, and the magnitude of the pressure has a large effect on the cooling effect.

This cooling technology is very attractive to the low temperature heat industry. For the body temperature and heat industry such as electronics, avionics, laser, photoelectric control, etc., this cooling technology is very practical.